Introducing the 0.96″ OLED Display Module with a 7-pin interface and a 128 × 64 pixel resolution — ideal when you need a small, crisp display for your embedded or IoT project.
This module is driven by the popular SSD1306 OLED controller, offering self-illuminating pixels (no backlight required) and wide viewing angle.
The “7-pin” interface provides more flexibility: Apart from the usual power and signal lines, you get dedicated pins for CS (chip select), DC (data/command), RST (reset) etc—making it easy to hook up via SPI or switch to I²C if needed.
Key Features
Resolution: 128 × 64 pixels.
Driver IC: SSD1306 (monochrome) — widely supported by libraries for Arduino, ESP32, RP2040 etc.
Interface: SPI by default (7-pin header) and many modules also allow I²C via jumpers or solder-pads.
Supply voltage: ~3.3V to 5V tolerant (many modules support both) so compatible with 3.3V MCUs like ESP32, RP2040 etc.
Size: Compact (~0.96″ diagonal) — great for embedding in small enclosures.
Ultra-low power consumption compared to TFTs — suitable for battery-powered applications.
Suggested Applications
Displaying text, sensor readings or icons in embedded systems (e.g., your projects with an ESP32 or RP2040)
IoT dashboards, wearable electronics, small controllers
Prototyping where space is tight but display clarity matters
Using with libraries like U8g2, Adafruit_SSD1306, or from MicroPython on ESP32/RP2040
Why Choose This Module?
If you’re working on projects such as your OLED timer, HUB75 display controller, or any microcontroller-based UI, this display gives you a reliable, easy-to-integrate option. The 7-pin SPI interface gives flexibility for wiring to MCUs like the one you’re using, and the popular SSD1306 driver means you’ll have lots of library support.
.jpeg "Picture of COD Available")
